Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 4 of 4

Thread: Rossbotics Angle Dresser

  1. #1

    Join Date
    Oct 2018
    Posts
    5
    Thanks
    4
    Thanked 9 Times in 2 Posts

    Tek12h's Tools

    Thumbs up Rossbotics Angle Dresser

    Recently, I’ve been looking for a grinding wheel dresser to dress some angles. I’ve came across the ever so popular radius/angle dresser, however that seemed too big for my needs. I did a little google search with some keywords and behold a DIY popped up. I understand this angle dresser is not meant for super accurate angle dressing as the commercially available ones are. I’m totally fine with angle block setup for accuracy, it will be great for what I’m doing. So all the Credit and Thanks goes to Rossbotics, he did all he hard work

    This tool was a gem to complete, and is quite the handy little dresser.
    I made a few changes to suit my needs. It’s a bit longer and wider, maybe 1/8” wider and about 1.5” longer.
    The threads were changed as well, he called for 3/8-16LH threads and I went for 7/16-20LH. Mainly because that’s the Size tap I had that was close as well as I had a die to make it quick.

    I used some 4140 for the body, 1018 for the base, pivot brackets, and screw retainer, 303 for the screw and handle knob, and 2024 AL for the knob.

    I did not get any pictures of the work on any of the smaller brackets as. They were simple drilling operations, I used stock to size and then cleaned it up on grinder.




    Starting work on the upper body portion.
    Rossbotics Angle Dresser-d5c05c1a-635b-420b-ade8-b98749c77dff.jpeg
    Rossbotics Angle Dresser-1a5a28cd-ab1b-4836-a684-61210c64c7f5.jpeg


    Cutting slot in lower body.
    Rossbotics Angle Dresser-c3fd99bd-ebda-4a32-9561-5ed2417c5d5c.jpeg
    Rossbotics Angle Dresser-8f224739-9a75-43bc-a1ad-db1f24154105.jpeg


    Body complete, testing fit
    Rossbotics Angle Dresser-f4ff6bc7-e059-40f5-b967-94115bd660d1.jpeg
    Rossbotics Angle Dresser-9c0e8655-cbe6-472c-b8cb-786ddf348a55.jpeg


    Lathe work is next, starting on the screw first.
    Rossbotics Angle Dresser-03e7d18c-ec9a-4811-9f86-825f26dd02c8.jpeg
    Rossbotics Angle Dresser-2042f549-ea23-408d-b18e-121f55c1f7f4.jpeg
    Rossbotics Angle Dresser-3e82670c-8831-4bd9-8e1b-201b2777d1fb.jpg


    The knob, tapered and threaded. Used a die for 10-24 threads.
    Rossbotics Angle Dresser-22db0217-12ae-4f41-8861-04236a831ecc.jpeg
    Rossbotics Angle Dresser-998033c1-0fa7-4f33-ac60-47ff2bdc380a.jpeg


    Finally the hand wheel. Knurls didn’t turn out too well, should’ve went deeper.
    Rossbotics Angle Dresser-34c2a3d7-46b5-4576-bdac-35083971dd3e.jpeg
    Rossbotics Angle Dresser-b6d68b07-c982-43d0-bb78-1e4640c466dd.jpeg
    Rossbotics Angle Dresser-23e0d8a4-7b1d-4f51-b0b6-26727c935f14.jpeg


    Final assembly before grinding.
    Rossbotics Angle Dresser-a9b75778-5c12-42e4-af21-c8e555635d35.jpeg
    Rossbotics Angle Dresser-869bc9a1-9de1-40b6-afb1-b5d243c0d61b.jpeg



    Grinding begins!
    Rossbotics Angle Dresser-ff7d7678-7a1d-4e2e-9d12-08ad8a586d41.jpeg
    Rossbotics Angle Dresser-622b607a-e157-43e2-8d79-deffc40b6beb.jpeg


    Final assembly, ready for use.
    Rossbotics Angle Dresser-f62e33f1-c6fa-401e-af17-78721abfb3cd.jpeg
    Rossbotics Angle Dresser-52b228c1-aed2-496f-8db9-6a8b167fbead.jpeg


    This was a fun project that will definitely get use in my shop. Thanks for checking it out and Thanks to Rossbotics for the clever idea and sharing it with us!
    Attached Thumbnails Attached Thumbnails Rossbotics Angle Dresser-195fa34a-aab1-42c2-8fd1-a8de46a63757.jpeg  

    186 More Best Homemade Tools eBook
    Last edited by Tek12h; Dec 13, 2019 at 04:40 AM.

  2. The Following User Says Thank You to Tek12h For This Useful Post:

    Jon (Dec 6, 2019)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts


    Thanks Tek12h! We've added your Angle Dresser to our Grinding category,
    as well as to your builder page: Tek12h's Homemade Tools. Your receipt:




    2000 Tool Plans

  4. #3

    Join Date
    Sep 2018
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    This is a wonderful and useful design. I could use this in my shop.

    GREAT WORK KEEP THAT MIND CREATING

    Thank you

  5. #4

    Join Date
    Oct 2018
    Posts
    5
    Thanks
    4
    Thanked 9 Times in 2 Posts

    Tek12h's Tools
    Thank you!
    There are dimensioned drawings available for the parts, Rossbotics has a ton of great parts he shares!



    186 More Best Homemade Tools eBook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •