Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 4 of 4

Thread: Lathe angle compound slide for the mill - video

  1. #1
    Jon
    Jon is online now Jon has agreed the Seller's Terms of Service
    Administrator
    Supporting Member
    Jon's Avatar
    Join Date
    Jan 2012
    Location
    Colorado, USA
    Posts
    25,446
    Thanks
    7,925
    Thanked 38,618 Times in 11,284 Posts

    Lathe angle compound slide for the mill - video

    Lathe angle compound slide for the mill. By Solid Rock Machine Shop Inc. 10:14 video:


    186 More Best Homemade Tools eBook

  2. The Following 2 Users Say Thank You to Jon For This Useful Post:

    FEM2008 (Jan 16, 2020), Karl_H (Jan 17, 2020)

  3. #2
    Supporting Member tonyfoale's Avatar
    Join Date
    Nov 2016
    Location
    Spain
    Posts
    1,549
    Thanks
    679
    Thanked 2,627 Times in 705 Posts

    tonyfoale's Tools
    What am I missing. I did not see anything there that could not have been done just as easily by clamping a lathe tool in the mill vice. I often use the mill as a lathe and I see no benefit in this device. I need educating.

    Lathe angle compound slide for the mill - video-mill-turn-01.jpg Lathe angle compound slide for the mill - video-mill-lathe-01.jpg Lathe angle compound slide for the mill - video-drill-mill.jpg Click on images for full size.

    2000 Tool Plans

  4. #3
    Supporting Member Karl_H's Avatar
    Join Date
    Sep 2013
    Posts
    790
    Thanks
    603
    Thanked 434 Times in 235 Posts

    Karl_H's Tools
    Quote Originally Posted by tonyfoale View Post
    What am I missing. I did not see anything there that could not have been done just as easily by clamping a lathe tool in the mill vice. I often use the mill as a lathe and I see no benefit in this device. I need educating.

    As I see it, he has coupled the movement on the X & Z axis to one dial. To do so by simply holding the lathe tool in a mill vise, you would have to turn 2 handles at the same time, at specific a ratio, to achieve the proper angle.

  5. #4
    Supporting Member tonyfoale's Avatar
    Join Date
    Nov 2016
    Location
    Spain
    Posts
    1,549
    Thanks
    679
    Thanked 2,627 Times in 705 Posts

    tonyfoale's Tools
    Quote Originally Posted by Karl_H View Post
    As I see it, he has coupled the movement on the X & Z axis to one dial. To do so by simply holding the lathe tool in a mill vise, you would have to turn 2 handles at the same time, at specific a ratio, to achieve the proper angle.
    OK I see it for tapers but the example part only had edge breaking bevels which even in a lathe you would normally do with the edge of a tool rather that swinging the compound around unless you were doing a lot.



    186 More Best Homemade Tools eBook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •