Need parts for Power King Drill press

[glenntref]

Trying to fix my drill press, and while I know the original part numbers (see picture), I have no idea where to buy, or how to ensure what I buy is correct.

The quill

Inside pulley


any help would be appreciated
glenn

[thehomeengineer]

Hi Glenn
Are you In a position to manufacture the parts you need as this might be the cheapest way. My experience in repairing machine tools it is very expensive and that is if you can find the spares for older machine’s.
I hope you are able to repair the drill soon
The Home Engineer

[IntheGroove]

That drill press nearly identical to my Delta. I would think many vintage drill presses of the same size are interchangable...

[RickT]

Hi Glenn, where are you located? If you are unable to make the parts you require, there may be someone near you that would be willing to help. If you pm me the model number and serial number of the unit, I will see if I can track down some info or parts locations for you.
Cheers!
Rick

[glenntref]

Hi Glenn
Are you In a position to manufacture the parts you need as this might be the cheapest way. My experience in repairing machine tools it is very expensive and that is if you can find the spares for older machine’s.
I hope you are able to repair the drill soon
The Home Engineer

no, unfortunately, most of my skill is on the wood side

[thehomeengineer]

Okay can you post part numbers. Where are you based? I might be able to help make bits if you can’t source