I was faced with a choice. Would I go to my local Ace Hardware and buy a hook to go on some web type strap or would I spend far more effort to make it myself? Since I have already mastered the art of buying stuff at Ace, it seemed reasonable to attempt making the hook.
If you are interested, please see
https://rick.sparber.org/FormingHook.pdf
Your comments are welcome. All of us are smarter than any one of us.
Thanks,
Rick
Rick
baja (Feb 29, 2020), benkeller3 (Mar 7, 2020), Carnel (Mar 2, 2020), Frank S (Feb 28, 2020), GedB (Mar 7, 2020), harleyron74 (Feb 28, 2020), Jon (Mar 5, 2020), mklotz (Feb 28, 2020), mwmkravchenko (Mar 1, 2020), Okapi (Mar 7, 2020), Seedtick (Feb 28, 2020), Sleykin (Mar 6, 2020), Toolmaker51 (May 15, 2022), Tule (Mar 7, 2020), verticalmurph (Feb 29, 2020)
Thanks rgsparber! We've added your Hook Forming Tool to our Metalworking category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:
n9dug (Mar 6, 2020)
Are not hooks with a safety clip better ? Thats what i prefer. Well done otherwise.
Any idea how to add one?
Rick
Rick
No. But if you look at pictures of ones im sure it wouldnt be hard to do.
Congratulations rgsparber - your Hook Forming Tool is the Homemade Tool of the Week!
This is an ingenious and thoughtfully assembled tool that checks a lot of the boxes favored by homemade tool builders: uses another homemade tool in its creation, is used to create another homemade tool, and is built with scrap that was found - literally - on the side of the road.
Some more good builds from this week:
Knife by Sam's Workshop Diary
Powered Turntable by mklotz
Paint Drying Rack by thehomeengineer
Toolmaker's Chair by shopandmath
Router Lift System by Didpoolhall
Large Diameter Measuring Method by desbromilow
Track Saw by Make Things
Angle Clamp by bouboulas
Folding Outfeed Table by Keith William Knull
Bandsaw Brass Cutting Setup by editor@glue-it.com
Shop Press Jack Modification by Captainleeward
Decorative Scroll Jig by kess
Bench Grinder Hub by craig9
Shop Press Release Knob by Captainleeward
Bench Grinder Rest by House_Work
Hand Drill Workbench Mount by Kwandotechnic
Rotary Tool by HandmadeCreativeChannel
Bench Vise by Kwandotechnic
Net Making Tools by Downeast Thunder
rgsparber - you'll be receiving a $25 online gift card, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and gift card choice and I'll get it sent over right away.
This is your 7th Homemade Tool of the Week. Here are all of your Homemade Tool of the Week winning tools. Congrats again
HomemadeTools.net founder (2012) and CEO
Join thousands of us, and start building your own tools today.
Nice tool, Rick.
Paul A.
Awesome job! anything to avoid practicing the art of financing the merchants must be fun!
Great Rick, thanks for for the effort of documenting your clever method! I like it, it will certainly be reused sooner or later.
Congratulations!
Cheers !
Christophe
________________________________________________________________
Visit my Website : http://www.labellenote.fr/
Facebook : La Belle Note
All my personal works, unless explicitly specified, are released under
Creative Commons BY-NC-SAlicense.
![](https://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.homemadetools.net%2Fforum%2Fshowthread.php%3Fp%3D203356%23post203356&media=https%3A%2F%2Fs3.amazonaws.com%2Fhmt-newsletter%2Fhmt_avatar_200.jpg&description=Forming A Hook For a Strap by rayh__ - Rick, I do appreciate that you stated the reason for the project. I can always use a good smile.
"Since I have already mastered the art of buying stuff at Ace, it seemed reasonable to attempt making the hook.="= "Pin It")
Rick, I do appreciate that you stated the reason for the project. I can always use a good smile.
"Since I have already mastered the art of buying stuff at Ace, it seemed reasonable to attempt making the hook."
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks