Milling machine - video

[Jon]

Milling machine. By SteelCraft. 14:31 video:

Previously:

Milling machine - video
Milling machine stand from cheap workbench - video
Milling machine - videos
CNC milling machine - video
Milling machine - video
Milling machine - video

[12L14]

Just too scary...

[Jon]

Part 2. 18:32 video:

[blkadder]

Well, he won't have to worry about it being too light. Amazing work for what he is dealing with. I think I would have run out of talent before the first video ended.

[wizard69]

Wow, proof that if you really want a mill you can have one.

Two thing stood out here:

The first question that comes to mind is who makes that tap holder? I've never seen anything like it. If it is a home made or DIY solution maybe somebody has the plans for it.

The second thing that comes to mind is belt tension, I wonder what his solution there will be.


In any event I hope Steelcraft continues to post as I'm always fascinated by these sorts of builds.

[Jon]

16:43 video:

[SteelCraft]

Part 4 14:03 video:

[NortonDommi]

Nice job. A lot of hours being invested there.

[SteelCraft]

And it's not even a half way..

Main problem is lack of steel in Poland, even price is almost 4 time bigger. Supplyers don't want to sell smaller sheets than 2 x 6 [m], large companies have priority.
The junkyard is my only source of steel.

Next video probably in december

[NortonDommi]

The pain! I feel you. Here even the scrap yards are charging top dollar and where I live not a lot of heavy stuff come through as most goes direct to the mill.