Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 2 of 2

Thread: Bottom quill nut, spacer for my 3hp Enco mill

  1. #1
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    11,178
    Thanks
    1,974
    Thanked 8,766 Times in 4,195 Posts

    Frank S's Tools

    Bottom quill nut, spacer for my 3hp Enco mill

    I finally got around to putting my Mill back together the new bearings arrived months ago, I had made the spindle bearing nuts for it months ago as well. The ongoing prototype project I am working on was nearing the point that I really needed the mill. So while waiting on parts I decided there is no time like the present time When I started fitting all the pieces back together, I noticed the bearing nuts were only going to catch about half the threads with the new taller bearings. I bored the quill then pressed in the races this was when I noticed 1 change always brings about another. the tapered bearings were taller but the races were not so after boring the quill the bottom nut was not going to touch the race .
    I made a spacer ring out of a scrap piece of 2 7/8" oilfield tubing
    Bottom quill nut, spacer for my 3hp Enco mill-img_20220120_135904em.jpg
    Bottom quill nut, spacer for my 3hp Enco mill-img_20220120_140746em.jpg
    Bottom quill nut, spacer for my 3hp Enco mill-img_20220120_142259em.jpg
    Bottom quill nut, spacer for my 3hp Enco mill-img_20220120_142335em.jpg
    Bottom quill nut, spacer for my 3hp Enco mill-img_20220120_123007em.jpg
    Bottom quill nut, spacer for my 3hp Enco mill-img_20220120_142552em.jpg

    186 More Best Homemade Tools eBook
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  2. The Following User Says Thank You to Frank S For This Useful Post:

    mwmkravchenko (Jan 30, 2022)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts


    Thanks Frank S! We've added your Bottom Quill Nut Spacer to our Milling category,
    as well as to your builder page: Frank S's Homemade Tools. Your receipt:




    2000 Tool Plans

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •