Do they stretch the tread to get it on or do the axles move closer? I don't see an idle roller.
I have questions.
Just remove 1 outside tire stretch the track over the remaining tires then re install the tireOriginally Posted by Elizabeth Greene
Never try to tell me it can't be done
When I have to paint I use KBS products
katy (Oct 9, 2022)
I remember seeing similar on Sherman tanks in the 1950s.
Two different diameter tires! So only ONE axle is driven and the other is idling??
Most probably, either that or they have 2 different rear end ratios or the poor power divider is getting a real work out. One possibility is since the tracks there would be no need to ever lock in the power divider undersized tires may have been installed on 1 axle to achieve a lower final drive ratio without having to change the rear ends
Never try to tell me it can't be done
When I have to paint I use KBS products
Saltfever (Oct 11, 2022)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks