Printable View
My son was having poor results with his new router. Seems that it was not cutting straight even with the use of a straight edge.
I found the round base was not centered with the spindle so this little "button" lines everything up before fastening the base screws.
One piece of .250" drill rod and a chunk of aluminum turned to the diameter of the center hole in the base.
Cheers, JR
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks jjr2001! We've added your Router Plate Alignment Tool to our Routing category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-router-plate-alignment-tool"> <img src="/uploads/169197/homemade-router-plate-alignment-tool.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-router-plate-alignment-tool">Router Plate Alignment Tool</a> <span> by <a href="http://www.homemadetools.net/builder/jjr2001">jjr2001</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/alignment'>alignment</a>, <a href='http://www.homemadetools.net/tag/router'>router</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->