This is easy to set up and works well, saves a lot of work. If using a big trailer it helps to tie a rope zigzag across the straps so it pulls the contents together as it leaves the body.
https://youtu.be/a_uterHM2tk
Printable View
This is easy to set up and works well, saves a lot of work. If using a big trailer it helps to tie a rope zigzag across the straps so it pulls the contents together as it leaves the body.
https://youtu.be/a_uterHM2tk
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks olefella! We've added your Trailer Unloader to our Trailers and Towing category,
as well as to your builder page: olefella's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-trailer-unloader"> <img src="/uploads/223413/homemade-trailer-unloader.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-trailer-unloader">Trailer Unloader</a> <span> by <a href="http://www.homemadetools.net/builder/olefella">olefella</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/trailer'>trailer</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
The "false tailgate" is a great way to unload things. I have a 4' x 4' x 8' long plywood box for sawdust collection and have a false tailgate in the front while it fills. Unloads great. When I was a kid, Dad's first silage wagons worked like this also, but the false tailgate was pulled backwards by a geared mechanism powered by a tractor.
good idea , used bent rim standing up at front of trailer w chain laid on floor to pulloff at the dump,25$ to attach chain(no straps allowed chain only) to bulldozer,which would go backwards pulling off load,as trailer remains stationary ,nothing else to use at the dump, u could make a long pole detachable and cable w winch to use at dump and save 25$ every time.if u didnt have a chain and rim they would also use a backhoe to pull off load with bucket , 25$ also, sometimes when i got at the dump late, they would use backhoe anyway and not charge me, so they could go home instead of waiting for me to unload by hand.
[QUOTE=olefella;133559]This is easy to set up and works well, saves a lot of work. If using a big trailer it helps to tie a rope zigzag across the straps so it pulls the contents together as it leaves the body.
Where I live people use this trick to unload their pickup full of unwanted stuff alongside the road.
when i do a rental cleanout, with only my truck, and i have some junk, i just use everybodys trashcan in the neighborhood, everyone gets a little trash the night before trash pickup,gas too high to waste on a trip where u might not get caught dumping.
there used to be a product advertised which was a self contained version of this. It was basically a strong tarp which connected across the bottom of the rear tail board opening, ran along the floor (essentially covered the floor), then up the front tail board. The load was put in the trailer, then the tarp came back over the load and connected to a geared roller at the top of the rear tail board.
When you went to unload, all you did was drop the rear tailboard, and wind the gear roller to pull the load out. It was advertised for loose product like leaves, gravel, sand etc.
Never had one, just recall the ad and thinking about if it would actually work for heavy loose material like sand or gravel.
Des