-
Solid Tool Post Block
Block was made from gray cast iron diameter 120 mm. Just to have the base as big as possible. Cross slide width is 120 mm.
https://www.youtube.com/watch?v=LFN8eSUCpfk&t=3s
Materials used:
grey cast iron, round bar, dia 120 mm
304 and 316 stainless steel
steel plate
bolts
Cheers
LMMasterMariner
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks LMMasterMariner! We've added your Tool Post Block to our Lathes category,
as well as to your builder page: LMMasterMariner's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="https://www.homemadetools.net/homemade-tool-post-block">
<img src="/uploads/252096/homemade-tool-post-block.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="https://www.homemadetools.net/homemade-tool-post-block">Tool Post Block</a>
<span> by <a href="https://www.homemadetools.net/builder/LMMasterMariner">LMMasterMariner</a></span>
</div>
<div class="tags">tags:
<a href='https://www.homemadetools.net/tag/tool-post'>tool post</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
-
Never thought of a reference block; seems worthwhile with a lot of single point threading on the horizon, and a holder preloaded with a bit.