Speed Handle for the 4 Inch CNC or Milling Vise

The handle that came with my new vise was, well let's just say "so not good".
I had seen the post by Rossbotics where he made a Rota Broach so he could make a very nice milling vise handle.
Here is the link: https://www.homemadetools.net/forum/...2179#post95664

I made mine a bit larger since I wanted a "Speed Handle". Man is this thing fast. One flip and it runs 10 turns of the lead screw.
After 4 flips (kinda like starting a glow engine) the vise has traversed the entire throat. Of course first I had to make the tool and the
broach for cutting the Hexagonal hole thru the center. Then it was just a matter of some lathe work and a bit of drilling.
Here is the result:

Cheers, JR

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks jjr2001! We've added your Mill Vise Speed Handle to our Vises category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-mill-vise-speed-handle-3"> <img src="/uploads/247972/homemade-mill-vise-speed-handle-3.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-mill-vise-speed-handle-3">Mill Vise Speed Handle</a> <span> by <a href="https://www.homemadetools.net/builder/jjr2001">jjr2001</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/vise'>vise</a>, <a href='https://www.homemadetools.net/tag/handle'>handle</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->