Links to some of my plans:
http://www.homemadetools.net/forum/f...6068#post65876 OFF-SET TAILSTOCK CENTER PLANS
http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS
http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS
http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS
http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET
http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION
I would have welded the nuts on the underside so I retained the square shoulder to adjust down to.. I also would have considered thinning or even halving the nuts so I didn't lose as much height.
That said, it's still nicer than some of the "feet" hiding under some of my tools/ stands/ etc
Post your reply!
Join 42,532 of us and get 500+ tool plans, tool eBooks, build guides, and much more.
There are currently 1 users browsing this thread. (0 members and 1 guests)