User Tag List

Results 1 to 10 of 18

Thread: Tail Stock Taper Turning Attachment

Aug 10, 2018, 05:52 AM #12

ddickey

Join Date

Jan 2018

Posts

16

Thanks

0

Thanked 29 Times in 6 Posts

ddickey's Tools

Awards Showcase

Total Awards: 1

I just finished mine. A really good project. Turned out nice. I don't have any straight knurls so used a fine diamond but sort of botched it. Not sure if it was the gummy aluminum or operator error. Also my knurler is for 2" max diameter so had to set it up off center quite a bit, I'm sure that didn't help. Also I had no way to mark out the thou and half thou lines so this is how it will be.

Last edited by ddickey; Aug 10, 2018 at 06:04 AM.

Reply With Quote
The Following 8 Users Say Thank You to ddickey For This Useful Post:

Jon (Aug 10, 2018), olderdan (Aug 10, 2018), Paul Jones (Aug 10, 2018), PJs (Aug 12, 2018), rossbotics (Aug 10, 2018), Seedtick (Aug 10, 2018), Toolmaker51 (Aug 10, 2018), zarembak (Aug 10, 2018)