I often run into Arduino applications that deal with realtime events. It is rather easy to write code that causes these events to be missed. Here is one way to solve the problem that avoids running at interrupt level.
If you are interested, please see
https://rick.sparber.org/AvoidingDelayFunction.pdf
Your comments are welcome. All of us are smarter than any one of us.
Thanks,
Rick
Isn't there FreeRTOS ports for the various ATMEGA parts? I use that on everything now but I mainly use NXP Cortex parts. I'm going to set up to run on the Arduino boards since they're so cheap to get ready made, simply erase the interpreter on it and load in real code.
I think it might be at the device but is not brought out to pins on the Pro Micro board. I looked into it a few years ago and found that is was poorly supported and documented. I made my own very modest device for the ATTINY-85 that used a single pin.
Rick
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks rgsparber! We've added your Technique for Sharing Realtime in Arduino to our Electronics category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-technique-for-sharing-realtime-in-arduino"> <img src="/uploads/232818/homemade-technique-for-sharing-realtime-in-arduino.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-technique-for-sharing-realtime-in-arduino">Technique for Sharing Realtime in Arduino</a> <span> by <a href="https://www.homemadetools.net/builder/rgsparber">rgsparber</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/arduino'>Arduino</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->