tent addition to the shop.

[Frank S]

Great idea for using with old billboard vinyls. They frequently come my way and are used in lots of different situations. I acquired an HF 10'x10' shed frame with no fabric and a 10'x20' advertising vinyl fits it perfectly.

That is what I will be covering this frame work with I have a 17x48 vinyl which will cover the top and both ends plus half way down the side, the remainder of the side will have a 6 mill clear plastic stretched over it to allow light in, one end will be left as a flap for entry. The paint we will be using on the things we will be coating required about 50% humidity to cure properly so before we hang anything from the overhead pipes we will wet the ground with a few hundred gallons of water allow it to soak in the tent itself will serve as a huge humidor chamber which with our normally too low humidity the moisture in the ground should be sufficient to raise the humidity enough for our purpose