Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 10 of 10

Thread: Threading Insert Tool Holder

  1. #1
    Supporting Member rossbotics's Avatar
    Join Date
    Dec 2013
    Location
    Florida
    Posts
    730
    Thanks
    1,019
    Thanked 1,639 Times in 402 Posts

    rossbotics's Tools

    Threading Insert Tool Holder

    I made this tool holder for holding a TNMC43NV carbide threading insert. The insert measures .187" thick with an I.C. of .500", it has a .200" diameter hole which is countersunk from both sides.This tool holder was machined on both sides to accept the insert on either or, With the ability to place the insert on either side of the tool lets me work closer to the chuck or closer to the tail stock of the lathe.

    The tool was made from 0-1 steel, hardened, tempered, and ground all over,
    Below are some photos

    Thanks For Looking
    And Happy Machining

    Doug

    Click here to purchase a set of these plans http://www.homemadetools.net/forum/t...l-holder-50378

    Threading Insert Tool Holder-100_0736.jpg

    Above shows the milling of the triangular seat

    Threading Insert Tool Holder-100_0737.jpg

    Above shows tapping the 5mm x .08 hole for holding the insert

    Threading Insert Tool Holder-100_0738.jpg

    Above shows the front view of the tool

    Threading Insert Tool Holder-100_0739.jpg

    Above shows a side view of the tool

    Threading Insert Tool Holder-100_0740.jpg

    Above shows another side view of the tool

    Threading Insert Tool Holder-100_0743.jpg

    Above shows the insert in it's seat

    Threading Insert Tool Holder-100_0744.jpg

    Above shows another view of the insert in it's seat

    Click here to purchase a set of these plans http://www.homemadetools.net/forum/t...l-holder-50378

    186 More Best Homemade Tools eBook
    Last edited by rossbotics; Sep 10, 2016 at 12:45 PM.
    Comments are always welcome
    Doug

    Subscribe to my you tube channel

    https://www.youtube.com/channel/UCDD..._as=subscriber



    Tool Plans for Sale by rossbotics






  2. The Following 11 Users Say Thank You to rossbotics For This Useful Post:

    Altair (Mar 29, 2015), aphilipmarcou (Oct 21, 2017), emu243 (Mar 30, 2015), high-side (Jun 26, 2019), HobbySpaner (Sep 11, 2016), Home-PC (Apr 29, 2022), Jon (Apr 2, 2015), kbalch (Mar 30, 2015), Paul Jones (Mar 28, 2015), PJs (Jun 16, 2015), Tonyg (Jun 26, 2019)

  3. #2
    Content Editor
    Supporting Member
    Altair's Avatar
    Join Date
    Aug 2013
    Posts
    11,727
    Thanks
    1,353
    Thanked 29,267 Times in 9,726 Posts
    Great work and very well detailed post as always, Doug.

    Al

    2000 Tool Plans

  4. #3
    jrlandau's Avatar
    Join Date
    Jan 2015
    Posts
    2
    Thanks
    0
    Thanked 2 Times in 1 Post

    jrlandau's Tools
    a model of what a post should be

  5. #4
    kbalch's Avatar
    Join Date
    Jun 2012
    Location
    Clermont, FL
    Posts
    5,034
    Thanks
    2,275
    Thanked 531 Times in 383 Posts
    Thanks Doug! I've added your Threading Insert Tool Holder to our Tool Holders category, as well as to your builder page: rossbotics' Homemade Tools. Your receipt:


  6. #5
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts
    Great post, rossbotics! Thanks for taking the time.

  7. #6
    kbalch's Avatar
    Join Date
    Jun 2012
    Location
    Clermont, FL
    Posts
    5,034
    Thanks
    2,275
    Thanked 531 Times in 383 Posts
    Hi Doug,

    Another well-machined piece and a great writeup! Your Threading Insert Tool Holder is the 'Tool of the Week'!

    Since you've already received one of our official HomemadeTools.net T-shirts…

    Threading Insert Tool Holder-hmt-t-shirts.jpg

    …we're pleased to award you a $25 online gift card from GiftRocket.

    Just let me have your email address (via PM) and we'll get things processed directly.

    Congrats!

    Ken

  8. The Following User Says Thank You to kbalch For This Useful Post:

    rossbotics (Dec 1, 2017)

  9. #7
    kbalch's Avatar
    Join Date
    Jun 2012
    Location
    Clermont, FL
    Posts
    5,034
    Thanks
    2,275
    Thanked 531 Times in 383 Posts
    This thread has been moved to the Must Read subforum. Congrats (and thanks) to Doug for making such a valuable contribution!

  10. #8
    Supporting Member Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,231
    Thanks
    5,810
    Thanked 1,440 Times in 655 Posts

    Paul Jones's Tools
    Hi Doug,

    There is a very nice hand tapper tool shown in one of your photos. Did you make this tool? If so, did you post this somewhere so we can see how it was made.

    Thanks,

    Paul

  11. #9
    Supporting Member rossbotics's Avatar
    Join Date
    Dec 2013
    Location
    Florida
    Posts
    730
    Thanks
    1,019
    Thanked 1,639 Times in 402 Posts

    rossbotics's Tools
    Thanks Paul
    Yes I made the hand tapper too, you can see all the tools I made by following the link below

    Homemade Tools built by rossbotics
    Comments are always welcome
    Doug

    Subscribe to my you tube channel

    https://www.youtube.com/channel/UCDD..._as=subscriber



    Tool Plans for Sale by rossbotics






  12. #10
    Supporting Member Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,231
    Thanks
    5,810
    Thanked 1,440 Times in 655 Posts

    Paul Jones's Tools
    Doug,

    Thanks for the URL. I would like to make a similar hand taper one of these days. I also like the way you insert text annotation in between the photos because it makes it so easy to follow along. I should do this on my posts.

    Regards, Paul



    186 More Best Homemade Tools eBook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •