Tool for dialing in off set center in a four jaw chuck

Tool for dialing in off set center in a four jaw chuck
In this video I will show you how to set up a square part in a 4 jaw chuck
Without holes or dimensions just a center punched mark to within 0.0002
And as an added bonus I will also show you how to make the tool to do it.

This was a fun video to make I incorporated a problem in to a live demo
There was 25 students watching me as I made the tool and set up the part in the four jaw chuck
The total time was about 20 to 30 minutes it took 5 times longer to edit then to film
There might be another video on heat treating
Hopefully you will enjoy this video
Ray
Video URL
https://youtu.be/e3moqbusj40

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks shopandmath! We've added your Offset Centering Tool to our Measuring and Marking category,
as well as to your builder page: shopandmath's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-offset-centering-tool"> <img src="/uploads/227424/homemade-offset-centering-tool.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-offset-centering-tool">Offset Centering Tool</a> <span> by <a href="https://www.homemadetools.net/builder/shopandmath">shopandmath</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/lathe'>lathe</a>, <a href='https://www.homemadetools.net/tag/dial-indicator'>dial indicator</a>, <a href='https://www.homemadetools.net/tag/centering'>centering</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

Thank You
More to come
Ray