-
5 Attachment(s)
Torx Drivers Holder
These Brand X Torx drivers came in an ugly plastic bag that did not add anything to the culture of my toolbox.
I made this holder out of a 2" diameter piece of black Nylon to keep the 6) drivers organized.
The annular cuts intersect the Ø .25 holes and hold 2) O'rings. When a driver is inserted into a hole, the O'rings exert enough friction to hold the driver in place.
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks gatz! We've added your Torx Drivers Holder to our Storage and Organization category,
as well as to your builder page: gatz's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="https://www.homemadetools.net/homemade-torx-drivers-holder">
<img src="/uploads/231923/homemade-torx-drivers-holder.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="https://www.homemadetools.net/homemade-torx-drivers-holder">Torx Drivers Holder</a>
<span> by <a href="https://www.homemadetools.net/builder/gatz">gatz</a></span>
</div>
<div class="tags">tags:
<a href='https://www.homemadetools.net/tag/tool-storage'>tool storage</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
-
Very nice!
How about the key way and central hole? Are they functional or were they already there from another project?
-
Thanks Karl.
No real reason for the 1" through hole; just thought it was needed.
The slot along the side is there to remove the O'rings.
If someone is inclined to make one of these, I would recommend using as large of cross-section O'ring as can be found.
The ones I used are 1/8" (.130) and the Torx driver has to be twisted back and forth a few times to get past the O'ring.
Not a big deal, but a larger cross-section would make that easier.
-
Great idea and thanks for sharing! The "ah-ha" moment for me is the rubber o-ring can be utilized with other holders that are not round. My nut drivers are in a rectangular base and when it gets knocked over they all fall out.