Track-mounted impact wrench - GIF

Track-mounted impact wrench.

<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/rail_mounted_impact_wrench.mp4" type="video/mp4"> Your browser does not support the video tag. </video>


Previously:

https://www.homemadetools.net/forum/...608#post170448
https://www.homemadetools.net/forum/...912#post156575
https://www.homemadetools.net/forum/...564#post170280
https://www.homemadetools.net/forum/...785#post167415
https://www.homemadetools.net/forum/...121#post115609

A two headed one would let you do both bolts at once

Quote:

---

Originally Posted by jdurand

A two headed one would let you do both bolts at once

---

I can one of these setup as a horizontal wrench when I removed track a few years ago. I can tell you that the tolerances on both sides are to sloppy to make that practical. Plus this is hard work. They are reasonably balanced but not exactly light.