Printable View
Tubing press/cut/punch machine.
<video controls autoplay loop>
<source src="https://diqn32j8nouaz.cloudfront.net/tubing_press_trim_punch_machine.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>
Previously:
https://www.homemadetools.net/forum/...688#post136656
https://www.homemadetools.net/forum/...664#post132916
https://www.homemadetools.net/forum/...919#post119767
Now a quick dress up on a belt grinder and the part is ready for coating and assembly
Nice piece of stamping tooling... I wonder what the end use is to justify the cost of the tooling? With that tooling, you should be able to do hundreds of these per hour, so it must be something with some volume needs.
The tooling is a pretty standard design for that, but in a mechanical conventional punch press. An easy 150 hits per minute. Good production rate volume
They appear to use something like an H-frame assembly press, or maybe an ironworker, definitely hydraulic evident by markedly slower rate. Low production rate, but safer for unskilled operators.
Hi Gang:
It is a 4 post ball bearing die set, way more precession than required. The punch is guided by the stripper, and the cut-off punch has a heal for the side thrust.
Carl.