Turn a thread die holder into a tap holder

Hi all,

Here's a handy gadget I made up quite a while back which allows you to hold thread taps in a die holder, and use a follower for any size.

https://www.youtube.com/watch?v=b7aCjgM_OYY

Make them very easily, to the shank size required, for next to nothing.

Cheers Rob

Great idea. This would be helpful for a mini mill, where z-height is basically nil.

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks xynudu! We've added your Tap Holder to our Tapping and Threading category,
as well as to your builder page: xynudu's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-tap-holder-7"> <img src="/uploads/249957/homemade-tap-holder-7.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-tap-holder-7">Tap Holder</a> <span> by <a href="https://www.homemadetools.net/builder/xynudu">xynudu</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/holder'>holder</a>, <a href='https://www.homemadetools.net/tag/tap-die'>tap & die</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

Very nice - will add this to my project "to do" list and hope to get to make one after I work my way down the list. Everything just takes time.