Turning crappy wood shredder to powerfull grinder / sander

Bought used wood shredder couple years ago.
Paid 30€ from it... after little use, i noticed
That this kind of cutting shredder ain't very usefull, specially with fresh wood, that i wanted to shred.
It was too slow in use, and got stucked too easily.

Stored it, and now i found better use for it.

It has 2000w motor and it runs 4000rpm.
That makes it pretty good grinder.

Attachment 25990

https://youtu.be/ZdHxi0XZSvM

Axle was originally with M22 thread.
Shaped it to M14. So that i could use it with angle grinder wheels.

More info can be found from this "work in progress thread"
http://www.homemadetools.net/forum/w...c-sander-69724

impressive transformation nice looking build

Quote:

---

Originally Posted by Frank S

impressive transformation nice looking build

---

Thank you very much Frank.
It looked like minion at the beginning.. but im happy that its not so minionish at the end.. Otherwise i would need to sew blue jeans for it. :D

Well it would certainly stand out in the shop! :rofl:

You have an extraordinary imagination Tuomas
Nice change over and well executed, beautiful job

Doug

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Tuomas! We've added your Grinder Sander to our Grinding category,
as well as to your builder page: Tuomas's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-grinder-sander"> <img src="/uploads/218458/homemade-grinder-sander.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-grinder-sander">Grinder Sander</a> <span> by <a href="http://www.homemadetools.net/builder/Tuomas">Tuomas</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/grinder'>grinder</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

Quote:

---

Originally Posted by bruce.desertrat

Well it would certainly stand out in the shop! :rofl:

---

Thanks. Yep it does.

Quote:

---

Originally Posted by rossbotics

You have an extraordinary imagination Tuomas
Nice change over and well executed, beautiful job

Doug

---

Thanks buddy. I made this without rush.. so i hope i don't need to update this one afterwards. Still, i got couple things that i could add it..

One is. I made four mounting screws to the bottom of the stand / cord tray... those allows me to mount it to another stand.
Then i could use it as a lathe..

I have been looking for an idea that I could adept to make a blade sharpener. I plan on building up the edge with hard-face rod, then sharpening them. Hard-facing rod is a chore to grind, but with a rough wheel, it can be done. It builds up quick on my diamond wheel, but Borzon wheels seem to do OK for the finish.
I have an old electric shredder that I am going to dig out of the scrap now.
Thanks & Smiles!

Quote:

---

Originally Posted by kutzbill

I have been looking for an idea that I could adept to make a blade sharpener. I plan on building up the edge with hard-face rod, then sharpening them. Hard-facing rod is a chore to grind, but with a rough wheel, it can be done. It builds up quick on my diamond wheel, but Borzon wheels seem to do OK for the finish.
I have an old electric shredder that I am going to dig out of the scrap now.
Thanks & Smiles!

---

Thanks for the comment. I am happy that you find use for this idea.

Jealous of your talents !

Quote:

---

Originally Posted by mbshop

Jealous of your talents !

---

Thanks.
But you shouldn't, its just a little practise. You never know what you can do before you have done it.

Here's with the 205mm sanding paper and pad.
Papers are 3M hookit papers, pad is made by Mirka. 205mm pad with M14 thread.

Attachment 26976

Now it can be used as a traditional disc sander too.