Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 8 of 8

Thread: Twin Tri-Pacer custom side-by-side double engined Tri-Pacer - photo

  1. #1
    Jon
    Jon is online now Jon has agreed the Seller's Terms of Service
    Administrator
    Supporting Member
    Jon's Avatar
    Join Date
    Jan 2012
    Location
    Colorado, USA
    Posts
    25,540
    Thanks
    7,950
    Thanked 38,792 Times in 11,326 Posts

    Twin Tri-Pacer custom side-by-side double engined Tri-Pacer - photo

    Twin Tri-Pacer custom side-by-side double engined Tri-Pacer. Largest image size available.



    Also known as the Wagner Twin 2, Wagner Twin Tri-Pacer, and Wagner Pacer 125, this was a standard PA-22 fitted with two 125 hp Lycoming O-290-D engines mounted side-by-side. The conversion was produced in three weeks by Harold Wagner from Portland, Oregon. To clear the two overlapping propellers the left engine shaft was fitted with a 4.75 in (121 mm) extension. After 100 hours testing, the aircraft was converted back to its original configuration.

    Previously:

    Casting a giant propellor GIF
    Propeller feathering - GIF

    186 More Best Homemade Tools eBook

  2. The Following 5 Users Say Thank You to Jon For This Useful Post:

    baja (Sep 3, 2019), Rangi (Sep 3, 2019), Scotsman Hosie (Sep 11, 2019), Seedtick (Sep 2, 2019), volodar (Sep 4, 2019)

  3. #2
    Supporting Member IAMSatisfied's Avatar
    Join Date
    Apr 2017
    Location
    The desolate ranch country of Northeastern corner of New Mexico, USA
    Posts
    394
    Thanks
    269
    Thanked 236 Times in 125 Posts

    IAMSatisfied's Tools
    Those props obviously have to be counter-rotating... I wonder what they used to keep them in sync. (chain, belt or direct gear drive?). It sure doesn't appear like there's much clearance between the tip of the propeller and the adjacent hub.

    Edit: If I would have paid attention, I'd have noticed the pitch of the propellers were identical.

    2000 Tool Plans
    Last edited by IAMSatisfied; Sep 3, 2019 at 08:31 AM.

  4. #3
    Supporting Member baja's Avatar
    Join Date
    Dec 2017
    Posts
    251
    Thanks
    7,623
    Thanked 82 Times in 60 Posts

    baja's Tools
    Quote Originally Posted by IAMSatisfied View Post
    Those props obviously have to be counter-rotating... I wonder what they used to keep them in sync. (chain, belt or direct gear drive?). It sure doesn't appear like there's much clearance between the tip of the propeller and the adjacent hub.
    https://1000aircraftphotos.com/Contr...David/8788.htm

  5. The Following 2 Users Say Thank You to baja For This Useful Post:

    IAMSatisfied (Sep 3, 2019), Rangi (Sep 3, 2019)

  6. #4
    Supporting Member IAMSatisfied's Avatar
    Join Date
    Apr 2017
    Location
    The desolate ranch country of Northeastern corner of New Mexico, USA
    Posts
    394
    Thanks
    269
    Thanked 236 Times in 125 Posts

    IAMSatisfied's Tools
    Thank you for that... I didn't even consider the possibility of adding an extension to one prop shaft... it certainly does the job.

  7. #5
    Supporting Member
    Join Date
    Jan 2016
    Location
    Southern tip of Vancouver Island
    Posts
    139
    Thanks
    957
    Thanked 39 Times in 28 Posts
    Quote Originally Posted by IAMSatisfied View Post
    Those props obviously have to be counter-rotating... I wonder what they used to keep them in sync. (chain, belt or direct gear drive?). It sure doesn't appear like there's much clearance between the tip of the propeller and the adjacent hub.

    Edit: If I would have paid attention, I'd have noticed the pitch of the propellers were identical.
    I would assume the two Lycomings are identical, as are the props. Not counter rotating. No need for any mechanical synching. Spacer puts props on separate planes. RPM synch is as in any simple twin; two hand throttles and pilotīs ears to minimize beats.
    Last edited by volodar; Sep 4, 2019 at 08:54 AM.

  8. #6
    Supporting Member
    Join Date
    Jan 2016
    Location
    Southern tip of Vancouver Island
    Posts
    139
    Thanks
    957
    Thanked 39 Times in 28 Posts
    We would assume the two Lycomings to be identical, same for props. So not counter rotating. And no need for any mechanical synching. Spacer puts props on separate planes. RPM sync is as in any simple twin - two hand throttles and pilotīs ears minimize any beats.

  9. #7
    Supporting Member Scotsman Hosie's Avatar
    Join Date
    Apr 2017
    Location
    Salt Lake City, UTAH
    Posts
    359
    Thanks
    4,937
    Thanked 85 Times in 60 Posts

    Scotsman Hosie's Tools
    What a weird looking hack for a Tri-pacer. Surprised it had enough wing – and heavy enough airframe – to support it, let alone the increase in stall speed.

  10. #8
    Supporting Member
    Join Date
    Jan 2016
    Location
    Southern tip of Vancouver Island
    Posts
    139
    Thanks
    957
    Thanked 39 Times in 28 Posts
    Quote Originally Posted by Scotsman Hosie View Post
    What a weird looking hack for a Tri-pacer. Surprised it had enough wing – and heavy enough airframe – to support it, let alone the increase in stall speed.
    Good points. Not clear whether the 100h testing included flight type(s), and with what results. Several other types Here:

    TwinNavion.com



    186 More Best Homemade Tools eBook

  11. The Following 2 Users Say Thank You to volodar For This Useful Post:

    Jon (Sep 14, 2019), Scotsman Hosie (Sep 17, 2019)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •