Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Unimat Lathe Cabinet for Storing Tooling and Supporting the Lathe and Milling Machine

  1. #1
    Supporting Member Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,231
    Thanks
    5,810
    Thanked 1,440 Times in 655 Posts

    Paul Jones's Tools

    Unimat Lathe Cabinet for Storing Tooling and Supporting the Lathe and Milling Machine

    A couple years ago I built a small cabinet for my old Unimat SL lathe and added a separate vertical column for the milling/drilling head. The cabinet has only one drawer with four separate compartments, and one of the compartments has two layers. The cabinet sides, drawer, and drawer front are made from ¾” red oak and finished with clear satin polyurethane. The top and bottom are made from ¾” Melamine particleboard laminated with a thermally fused resin coating to provide a durable and oil-proof hard surface. I made the knurled knobs from ½” aluminum rod.

    The cabinet sits on four rubber feet whereby the combined weight of the lathe and tooling stored in the drawer provides enough weight to keep the lathe from moving on the workbench. The cabinet top has threaded brass inserts for holding the milling column base to a 1”x3”x12” aluminum bar using cap head screws. The lathe sits on two 1”x1”x6” aluminum riser blocks that are held in place with flathead machine screws inserted from underside of the top sheet of melamine and secured with washers and brass nuts. The two sides and back of the cabinet contain 10-32 threaded inserts I made for cap screws to hold optional Lexan splash shields when fly cutting with the milling head.

    More information about the Unimat lathe modifications can be seen at http://www.homemadetools.net/forum/m...00-lathe-10111 .
    Attached Thumbnails Attached Thumbnails Unimat Lathe Cabinet for Storing Tooling and Supporting the Lathe and Milling Machine-unimat-improvements-cabinet.jpg  

    186 More Best Homemade Tools eBook
    Last edited by Paul Jones; Dec 10, 2015 at 02:12 PM.

  2. The Following 3 Users Say Thank You to Paul Jones For This Useful Post:

    backyard_cnc (Feb 13, 2016), Christophe Mineau (Nov 17, 2014), kbalch (Nov 17, 2014)

  3. #2
    Content Editor
    Supporting Member
    Altair's Avatar
    Join Date
    Aug 2013
    Posts
    11,722
    Thanks
    1,353
    Thanked 29,236 Times in 9,716 Posts
    That's a neat storage solution Paul.

    Al

    2000 Tool Plans

  4. The Following User Says Thank You to Altair For This Useful Post:

    Paul Jones (Nov 16, 2014)

  5. #3
    Supporting Member Christophe Mineau's Avatar
    Join Date
    Jul 2014
    Location
    France, Brittany !
    Posts
    913
    Thanks
    825
    Thanked 1,687 Times in 481 Posts

    Christophe Mineau's Tools
    Really Nice !
    I definitely love when projects merge wooden things and metal
    I like the knurled buttons.

    Is the nice chest on you bench done by you also ?
    Thanks
    Christophe
    Cheers !
    Christophe
    ________________________________________________________________
    Visit my Website : http://www.labellenote.fr/
    Facebook : La Belle Note
    All my personal works, unless explicitly specified, are released under
    Creative Commons BY-NC-SA license.

  6. The Following User Says Thank You to Christophe Mineau For This Useful Post:

    Paul Jones (Nov 17, 2014)

  7. #4
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts
    Like the guys here, I have varied interests, so any storage solution that keeps the varied stuff from mingling is of interest to me. Nice job on this one.

  8. The Following User Says Thank You to DIYer For This Useful Post:

    Paul Jones (Nov 17, 2014)

  9. #5
    Supporting Member Hotz's Avatar
    Join Date
    Feb 2013
    Location
    South of Brazil.
    Posts
    360
    Thanks
    157
    Thanked 75 Times in 51 Posts

    Hotz's Tools
    Very cool.
    Sorry my mistakes in english.
    to share your tip >>> http://www.homemadetools.net/forum/tool-tips-tricks/ <<<

  10. The Following User Says Thank You to Hotz For This Useful Post:

    Paul Jones (Nov 17, 2014)

  11. #6
    kbalch's Avatar
    Join Date
    Jun 2012
    Location
    Clermont, FL
    Posts
    5,034
    Thanks
    2,275
    Thanked 531 Times in 383 Posts
    Thanks Patrick! I've added your Lathe Cabinet to our Metalworking and Woodworking, and Storage and Organization categories, as well as to your builder page: Patrick's Homemade Tools. Your receipt:


  12. #7
    Supporting Member Paul Jones's Avatar
    Join Date
    May 2014
    Location
    Del Mar, California
    Posts
    1,231
    Thanks
    5,810
    Thanked 1,440 Times in 655 Posts

    Paul Jones's Tools
    Christophe,
    Yes, the cabinet in the background was also made by me when I was a teenager and almost fifty years ago. This one was made from scrap plywood. Back then I cut the wood parts with one of those circular saw adapters that fitted onto a corded 1/4" power drill. Seems pretty crude compared to what I now have in my shop but it worked and I learned a lot from the experience. By the way, I wanted to line the cabinet drawers in green felt but it was just after Christmas when I built the cabinet and the red felt was on sale, so I bought it instead. Here is a photo of one of the drawers to the old cabinet. I also included another photo of my first tool cabinet I built when I was fourteen and again made it from scrap plywood that the lumberyard owner gave to me for free. I still use both of the old cabinets along with a couple of the Kennedy machinist tool chests.
    Thanks for asking, Paul
    Last edited by Paul Jones; Jun 24, 2015 at 09:59 PM.

  13. The Following User Says Thank You to Paul Jones For This Useful Post:

    Christophe Mineau (Nov 18, 2014)

  14. #8
    Supporting Member crazypj's Avatar
    Join Date
    Nov 2014
    Location
    Central Florida
    Posts
    53
    Thanks
    5
    Thanked 18 Times in 13 Posts

    crazypj's Tools
    What a brilliant idea, wish I had thought of it.
    I'm going to have to make one

  15. The Following User Says Thank You to crazypj For This Useful Post:

    Paul Jones (Nov 29, 2014)

  16. #9
    Supporting Member Paul Alciatore's Avatar
    Join Date
    Mar 2014
    Location
    Beaumont, TX
    Posts
    303
    Thanks
    9
    Thanked 155 Times in 82 Posts

    Paul Alciatore's Tools
    Saw this on a Homemade Tools e-mail today and it is really neat.

    I also have a Unimat DB-200, the original CI model which I am presently restoring with a new paint job. I have a full steel bench dedicated to it. But I may copy some of your other ideas that I see in the photos. I long planned to add a caliper and DI for DRO capability so I am studying your photos carefully. I also would like to add a permanent vertical column but I think I would use a metal base plate, probably aluminum, to tie it to the Unimat. I don't see why you have to use an actual Unimat column as any 25mm diameter rod would work.

  17. #10
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,433
    Thanks
    357
    Thanked 6,378 Times in 2,116 Posts

    mklotz's Tools
    For the benefit of future readers...

    The only improvement I might suggest is a piece of 1/8" steel plate under the Unimat. That would allow one to use all sorts of magnetic bases to hold measuring tools, lubrication feeds, lights, microscopes etc.. DAMHIKT. I have a Unimat too and had to add the steel plate as an afterthought.
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •