make quick release system locking table for my drill press stand. This system can easy instal or release top table as you need. I add extension table for easy wider drill, you can pull out and pull in extension table as you need.
https://youtu.be/LTJ85TV0gvQ
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Didpoolhall! We've added your Drill Press Table to our Drilling and Drill Presses category,
as well as to your builder page: Didpoolhall's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-drill-press-table-47"> <img src="/uploads/248707/homemade-drill-press-table-47.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-drill-press-table-47">Drill Press Table</a> <span> by <a href="https://www.homemadetools.net/builder/Didpoolhall">Didpoolhall</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/table'>table</a>, <a href='https://www.homemadetools.net/tag/drill-press'>drill press</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Those appear commercially made clamping straps. Not one of the woodworking variety slot them a reasonable distance to gain clamping leverage; if anything the opposite of 'gain'. The lack of spherical segments under fastener to create flat plane is another shortcoming.
A perfect application to use some spherical rocker are spacers from the valve train of GM enginesQuote:
Originally Posted by Toolmaker51
Those [GM rocker balls] would work well. They're probably 10mm now, older were 3/8". In a pinch we drill centered through short piece of round stock, top milled flat.