New video on my YouTube Channel:
https://youtu.be/wXDNWAEgBc0
Its about making versatile worktable to small workshop.
Attachment 38903
Printable View
New video on my YouTube Channel:
https://youtu.be/wXDNWAEgBc0
Its about making versatile worktable to small workshop.
Attachment 38903
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Tuomas! We've added your Work Table to our Workbenches category,
as well as to your builder page: Tuomas's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-work-table-4"> <img src="/uploads/248177/homemade-work-table-4.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-work-table-4">Work Table</a> <span> by <a href="https://www.homemadetools.net/builder/Tuomas">Tuomas</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/table'>table</a>, <a href='https://www.homemadetools.net/tag/casters'>caster(s)</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
One asked plans for the table:
Location of the welds matters.
Otherwise it might produce distortion and prevent mounting / extension / vise components to move inside the frame.
Attachment 38913
Idea is that you can easily mount / unmount vise, bending-, extension, grinding-.. or any other tool from the table, and get more room for it when needed.
Attachment 38914Attachment 38915
Table also has built in vise ( moxon or how its called ? ) that also works as an extension part.
This can be also replaced if needed.
Mounting has made using 30mm x 30mm x 3mm square tube. Its strong and gives firm connection inside 40mm x 40mm x 4mm tube ( frame )
Bending brake and vise / extension part has been connected to 30mm square tubes with 4mm thick plate, then those comes to same level with table top.
Fantastic table. People would pay good money for something like that. Great job!
Lots of neat ideas in that video! Excellent concept.
I made some adds.
Pop-up bench dogs:
Attachment 39011
Shelf:
Attachment 39012
Pull out clamping support:
Attachment 39013Attachment 39014Attachment 39015
Then router and plane mounts.
Hooks for materials.
6mm x 30mm stainless 316l
Bend and then bolted to frame with two M6 bolts / each.
Attachment 39025
Thats genius, Tuomas.👍 Very usefull.