Printable View
Plier / handled tool rack.
Another simple tool storage solution.
Wall mounted plier rack. Easy to use and see the sort of the plier, without taking much space. Fits for different sized pliers.
Attachment 39780
Frame is made from stainless steel sheet and pipes.
Keyholes for mounting are made with die grinder.
Attachment 39781
Attachment 39782
Another great build.
Pliers, screwdrivers, combination wrenches, grinders, and C" clamps all need to have their own rack to hang from
I like having my angle grinders on the wall as well
But pliers will clutter up a tool box drawer worse than just about anything else the one you need is always on the bottom of the pile and every one of them above it will decide to open the handles when you try to close or open the drawer
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Tuomas! We've added your Pliers Rack to our Racks category,
as well as to your builder page: Tuomas's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-pliers-rack-7"> <img src="/uploads/249336/homemade-pliers-rack-7.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-pliers-rack-7">Pliers Rack</a> <span> by <a href="https://www.homemadetools.net/builder/Tuomas">Tuomas</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/rack'>rack</a>, <a href='https://www.homemadetools.net/tag/pliers'>pliers</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Frank.Quote:
Originally Posted by Frank S
Yep, that was what i used so far. Never found the one i needed. :)
PS. End parts are easier to make using angle iron. I just didn't had suitable sized available, so i used what i had.
Tuomas many of us could or should write books on using what we had. In a way we all are doing just that each and every time we post our creations on these forum's
Very nice.
I've got a similar arrangement on the side of my welder/plasma cart for c-clamps and vise grips. Another like it on my grinder cart for angle grinders (hook arbor behind wheel over over top bar). Very handy as a general idea.
Thanks. Yep, same idea can be used in many different tools.Quote:
Originally Posted by Baddog
I made this for clamps.
https://www.homemadetools.net/forum/...286#post182080
I like to have couple different clamps always near.
Usually you need one " fast ", then its good to have couple near you.
Other clamps i keep in drawer. When i need many, that's usually predictable, and i can take them near before i start building.
Yep. That's right. Sharing the idea is what matters. :)Quote:
Originally Posted by Frank S
I have an old bicycle wheel screwed to a rafter over my bench with F-clamps and spring clamps hanging from it. Nearby but out of the way. Attachment 39791
If I"m not lazy and hang all the heavy ones on one side it turns quite easily to get at the various ones as needed.
Thanks for another great post!
As for your materials, when I first looked I literally thought you had drilled holes in repurposed machine tool door handles. I suspect that there are lots of ways to accomplish the same results. A guy might even use wood��
By the way, what you are able to create with an angle grinder is inspirational.
Quote:
Originally Posted by Tuomas
I have been using those screwdriver pegboard holders for pliers but sometimes they get stuck, and my vise grip doesn't really fit well - need to back out the bolt on the bottom long enough to hold. This gave me the inspiration to come up with a better - way. Thanks; Nick
Angle iron isn't a demonstration of ability. Fabbing stainless sheet into fine structural elements, that's talent.Quote:
Originally Posted by Tuomas
