Printable View
https://youtu.be/wKDTvLXCUUU
Hi all,
A friend sent me some woodruff cutters to have a go with, but they were MT2 with a whitworth thread. I got a sleeve to adapt the Morse Taper 2 to my mill's Morse Taper 3, but needed to make a new drawbar with a whitworth thread.
Cheers,
Paul.
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks PaulsGarageProjects! We've added your Drawbar to our Machining category,
as well as to your builder page: PaulsGarageProjects's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-drawbar-5"> <img src="/uploads/260103/homemade-drawbar-5.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-drawbar-5">Drawbar</a> <span> by <a href="https://www.homemadetools.net/builder/PaulsGarageProjects">PaulsGarageProjects</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/drawbar'>drawbar</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->