Woodturning tool wall panel

[Doc]

Hi Christophe
Some piccies as promised. My tenon spanners which also are sharpened so I can actually cut the tenon to size.

Shown are (from the bottom) 7mm, 13mm, 16mm and 19mm spanners. They are ground so there is a 'top' edge and a 'bottom' edge.

They don't replace my skew or any other wood turning chisels but speed up my production of magic wands, drop spindles (for spinning wool) and so on. Basically for anything needing a small tenon so it fits into my chuck or whatever.

Sorry for the poor quality photos
Regards

Doc