Yet Another Toolpost Milling Drilling Grinding Spindle

Very simple to construct from readily available parts;
- C12-ER16A-150L spindle
- two BK12 bearing blocks (total four 6001Z bearings inside)
- Locknut (BK12) with setscrew drilled to 12 mm
- Flat bars, 60 x 10 mm and 25 x 15 mm, length 100 mm, stainless steel 304
- Allen cap screws; four 8mm and eight 6 mm
- Cordless drill

Took me 8 hours to complete this job. No drawings were necessary for this build.

https://www.youtube.com/watch?v=Z-vR...ature=youtu.be

https://www.youtube.com/watch?v=-YJL...ature=youtu.be

Cheers
LMMasterMariner

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks LMMasterMariner! We've added your Tool Post Grinding Spindle to our Grinding category,
as well as to your builder page: LMMasterMariner's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-tool-post-grinding-spindle"> <img src="/uploads/209533/homemade-tool-post-grinding-spindle.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-tool-post-grinding-spindle">Tool Post Grinding Spindle</a> <span> by <a href="http://www.homemadetools.net/builder/LMMasterMariner">LMMasterMariner</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/milling'>milling</a>, <a href='http://www.homemadetools.net/tag/grinding'>grinding</a>, <a href='http://www.homemadetools.net/tag/drilling'>drilling</a>, <a href='http://www.homemadetools.net/tag/spindle'>spindle</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->