Hi Kbalch,

Thanks for your welcome !
I have so much in my todo list, that I'll have first to prioritize ;-). Main priorities should be :

- CNC foamcutter, using an "IPL5X" device / Vacuum pump and regulation system in order to build RC gliders for next summer.

- Increase rigidity of my home made CNC foam and plywood milling machine (I forgot to mention I had one), in order to try to be able to machine aluminium.

- For my lathe : carriage stop, leadscrew protection, Compound Clamp, spindle handle (most of them are already nicely described in Steve's Bedair site, you probably know). Improve my milling table usage,

- Later, for milling purpose : make a little study in order to see if there is any chance to be able to build a small steel milling machine (I know most of the people say it's very difficult, but I feel need to have a look), or if I have to "invest" in a manual milling machine like Sieg X2.

I will share and exchange on that subjects when I'll start, but now I am cleaning and storing evrything in my workshop, because that's in fact clearly the main priority. I did'nt have time to do that since several years !