Free 173 Best Homemade Tools eBook:  

Homemade Manual Disc Sander


Manual Disc Sander
Advertisement
BUILDER:
EMVarona on lumberjocks.com
DESCRIPTION:
Homemade manual disc sander constructed from wooden boards, a steel shaft, pillow bearings, and wooden knobs. Intended to be clamped to a work table.
RATING:
(0)
Post a comment
Sep 12, 2014 5:41 PM
DIYer
Although I'm not to keen on spinning a sanding disc manually, this would work. And adding a pulley and motor should be pretty easy with this setup.
Read all comments
Rate this build:
CATEGORIES:
LEVEL OF DETAIL (1-5):
2


Newest Forum Posts
  1. How to drill a small hole diameter by shopandmath on 2020-01-27 07:03:00
  2. how to clean a surface plate by shopandmath on 2020-01-27 07:01:37
  3. Taper attachment and how its works by shopandmath on 2020-01-27 06:57:41
  4. Wire Bender by thehomeengineer on 2020-01-27 06:33:09
  5. Cooking chicken in a homemade barrel oven - GIF by Altair on 2020-01-27 06:07:01
  6. No Tear Countersink in Woods, Even Soft Wood Like Pine by graymr on 2020-01-27 05:22:23
  7. Making 90 Degrees Welding Clamp from Pipe Steel by thehomeengineer on 2020-01-27 04:09:22
  8. AeroTrain by jdurand on 2020-01-27 02:20:07
  9. Boot jack - photo by Tooler2 on 2020-01-27 01:08:14
  10. Woman playing jianzi in the street - GIF by Scotsman Hosie on 2020-01-26 23:35:49
DIY Manual Disc Sander - comment on how to build a Manual Disc Sander - 1 comments
DIYer says:
Sep 12, 2014 5:41 PM
Although I'm not to keen on spinning a sanding disc manually, this would work. And adding a pulley and motor should be pretty easy with this setup.

Related Homemade Tools:



Signup for our newsletter and get the 173 Best Homemade Tools eBook free!