Free 186 More Best Homemade Tools eBook:  

Homemade Thin Stock Sawing Method


Thin Stock Sawing Method
 
186 More Best Homemade Tools eBook
TOOL:
Thin Stock Sawing Method
BUILDER:
rgsparber on homemadetools.net
DESCRIPTION:
Homemade thin stock sawing method constructed from wood blocks and C-clamps. Intended to be used on a bandsaw.
RATING:
(0)
Post a comment
login / register
Dec 23, 2023 1:38 PM
Manitoba Man
I know and feel your sawing problem. In smaller piece I have clamped a pair of Visegrip clamps on the piece being cut off. I can help to steady the clamp with your hand. The mass of the clamp dampened the vibration thre leads to pinching and blade breakage. Sometime I put a clamp on the part in the vise if there is room.
Read all comments
Rate this build:
CATEGORIES:
Workholding
TAGS:
bandsaw, C-clamp, holding
LEVEL OF DETAIL (1-5):
3
URL:
https://www.homemadetools.net/forum/sawing-thin-tall-stock-horizontal-bandsaw-99845#post232519
FILES:


Newest Forum Posts
  1. Manually forming decorative concrete blocks - GIF by Altair on 2024-04-28 06:07:02
  2. Carriage Stop For The Lathe by DIYer on 2024-04-28 04:48:03
  3. Mortise and tenon felling cut - GIF by Saltfever on 2024-04-28 03:06:18
  4. Getting my Russian shop set up by jdurand on 2024-04-28 02:59:08
  5. Ammunition depot explosion - GIF by Altair on 2024-04-27 21:51:01
  6. Lawnmower welding fire - GIF by Frank S on 2024-04-27 21:09:29
  7. Simple welding helmet modification by Saltfever on 2024-04-27 20:58:40
  8. Snowblower clearing thick snow - GIF by Altair on 2024-04-27 20:27:01
  9. Plastering faux stone wall - GIF by Altair on 2024-04-27 19:13:01
  10. Automatic retractable car cover - GIF by nova_robotics on 2024-04-27 18:39:30
DIY Thin Stock Sawing Method - comment on how to build a Thin Stock Sawing Method - 1 comments
Manitoba Man says:
Dec 23, 2023 1:38 PM
I know and feel your sawing problem. In smaller piece I have clamped a pair of Visegrip clamps on the piece being cut off. I can help to steady the clamp with your hand. The mass of the clamp dampened the vibration thre leads to pinching and blade breakage. Sometime I put a clamp on the part in the vise if there is room.
Related Homemade Tools:
Next →
← Prev



Homemade Tools eBooks

Signup for our newsletter and get the 186 More Best Homemade Tools eBook free!