Free 50 Best Homemade Tools eBook:  
Remove advertisements
Results 1 to 7 of 7

Thread: Tangential tool holder.

  1. #1

    Join Date
    Oct 2015
    Posts
    18
    Thanks
    0
    Thanked 81 Times in 12 Posts

    th62's Tools

    Tangential tool holder.

    Tagential tool holders.
    These are a couple of tool holders I’ve made. One takes a square 3/16” bit, the other (prior to welding) takes a round bit. The third is a left/right tool holder and obviously not meant to hold two bits at once (not much point). I use these tool holders all the time now and they work well.

    The holders were made of two sections welded together and linished. The tool slot is cut so the tool sits at a 45 degree angle, it’s clamped in place by a slotted clamp which is tightened via a 5mm allen head,
    Attached Images Attached Images        

  2. The Following 7 Users Say Thank You to th62 For This Useful Post:

    Buckstop (10-13-2015), Jon (10-09-2015), kbalch (10-10-2015), mwmkravchenko (02-20-2018), Paul Jones (10-10-2015), PaulM (02-18-2018), PJs (10-12-2015)

  3. #2
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,087
    Thanks
    327
    Thanked 626 Times in 567 Posts
    Thanks th62! We've added your Square Bit Tangential Tool Holder to our Tool Holders category, as well as to your builder page: th62's Homemade Tools. Your receipt:


  4. #3
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,087
    Thanks
    327
    Thanked 626 Times in 567 Posts
    Thanks th62! We've added your Round Bit Tangential Tool Holder to our Tool Holders category, as well as to your builder page: th62's Homemade Tools. Your receipt:


  5. #4
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,087
    Thanks
    327
    Thanked 626 Times in 567 Posts
    Thanks th62! We've added your Dual Sided Tangential Tool Holder to our Tool Holders category, as well as to your builder page: th62's Homemade Tools. Your receipt:


  6. #5
    PJs
    PJs is offline
    PJs's Avatar
    Join Date
    Sep 2014
    Location
    Northern CA
    Posts
    947
    Thanks
    4,937
    Thanked 741 Times in 478 Posts

    PJs's Tools
    Beautiful workmanship TH62! I like the way you left room to get up close to the work with them. Curious how the dual one works and how you use it? Thanks for sharing! ~PJ
    ‘‘Always do right. This will gratify some people and astonish the rest.’’
    Mark Twain

  7. #6

    Join Date
    Oct 2015
    Posts
    18
    Thanks
    0
    Thanked 81 Times in 12 Posts

    th62's Tools
    The dual holder is used in the same manner as the others. Only one cutting bit in place at a time depending on whether you want a LH or RH tool.

  8. The Following User Says Thank You to th62 For This Useful Post:

    PJs (10-14-2015)

  9. #7

    Join Date
    Apr 2017
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Looks great, am going to build one if I can figure out haw to get the print.


    Post your reply!
    Join 33,912 of us and get our 50 Must Read Homemade Tools eBook free.



    50 Must Read Homemade Tools

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •