https://youtu.be/2d9irDLIq8I
Printable View
Congratulations Make Things - your Square Nut Inlay Tip is the Tool Tip of the Month for April 2023!
This is an easy upgrade for the very common practice of inlaying hex nuts.
Some more nice tool tips from April:
Centering Dowels by Make Things
Recycling Saw Blades by xynudu
Bandsaw Sled Possibilities by Make Things
Parallel Ring Mandrel by thehomeengineer
Protect Hidden Tools From Rust by Make Things
Removing a Dial Indicator Needle by mr_modify1
Fighting Drilling Heat by Make Things
Under Shelf Battery Charger by mr_modify1
Unmarking Tips by Make Things
Checking Parallelism of Mike Anvils by mklotz
Make Things - we've added your Tool Tip to our All Tool Tips of the Month winners post. And, you'll now notice the tool tip award in the awards showcase in your postbit, visible beneath your username:
https://www.homemadetools.net/forum/...fTheMonth1.pnghttps://www.homemadetools.net/forum/...MonthIcon1.png
And, you'll be receiving a $100 online gift card, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and gift card choice and I'll get it sent over right away.
Congrats again :thumbsup:
Congratulations Make Things - a well-deserved win.
I love my chisels, both carpentry and carving varieties. However, on the rare occasions when I inlaid something into wood I found it much easier to use a Dremel router to create the pocket. The lower power makes it more controllable than a typical router, smaller diameter bits are readily available and the flat bottom is produced automatically.