User Tag List

Results 1 to 6 of 6

Thread: 3.5" live center

May 23, 2018, 01:47 AM #5

Frank S

Supporting Member

Join Date

Aug 2015

Location

Peacock TX

Posts

12,617

Thanks

2,677

Thanked 11,111 Times in 5,391 Posts

Frank S's Tools

Awards Showcase

Total Awards: 14

12 bolts I had 2 of the 6207s I could swap them out for an angular contact but it would hardly be needed since the size of the bearing are so large 35 mm ID 72 MM OD 14 mm thick with 12 11.1 mm balls No more thrust load that could possibly be placed on them by the tails stock screw there really is no need for a thrust bearing or even an angular contact they have a radial capacity of 31022.750n per bearing and if it were even possible to exert as much as 2224n the bearing life would be 7915 hrs at 1200 RPM

Never try to tell me it can't be done
When I have to paint I use KBS products

Reply With Quote
The Following 2 Users Say Thank You to Frank S For This Useful Post:

12bolts (May 23, 2018), PJs (Aug 27, 2018)