Another way to make an arbor

There are many ways to make arbors.

This method is quite simple and straight forward.

https://www.youtube.com/watch?v=UaNjRJsYpeg

The small amount of bronze brazing required can easily be done with MAPP gas or an equivalent gas torch.

Cheers

Rob

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks xynudu! We've added your Arbor to our Metalworking category,
as well as to your builder page: xynudu's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-arbor-4"> <img src="/uploads/252346/homemade-arbor-4.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-arbor-4">Arbor</a> <span> by <a href="https://www.homemadetools.net/builder/xynudu">xynudu</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/arbor'>arbor</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

There's been a couple simple arbors lately, this one is also good.
But I prefer blotters under driving faces of grind wheel flange and washer. Especially due to fact little ones won't pass a 'ring test' like larger sizes, and operate in substantially higher RPM ranges. Life threatening? No, but could wreck a properly sized finish diameter......