Articulating Grabo Vacuum Clamp

**Keith William Knull** · Jan 10, 2022, 07:22 PM

Just got a Grabo for Christmas so I came up with a few ideas to maximize its usefulness.
It’s designed as a battery powered lifting tool that monitors and maintains vacuum pressure. I wanted to make some kind of clamp that can mount to my work table to hold down work pieces quickly. This is what I came up with:

Mostly made out of 5/8” plywood.

If any of you are interested in the Grabo Lifter, check out Izzy Swan on YouTube.

**Floradawg** · Jan 18, 2022, 02:26 PM

Originally Posted by Keith William Knull

Just got a Grabo for Christmas so I came up with a few ideas to maximize its usefulness.
It’s designed as a battery powered lifting tool that monitors and maintains vacuum pressure. I wanted to make some kind of clamp that can mount to my work table to hold down work pieces quickly. This is what I came up with:

Mostly made out of 5/8” plywood.

If any of you are interested in the Grabo Lifter, check out Izzy Swan on YouTube.

1/4-20 in Canada? They might disown you