Articulating Grabo Vacuum Clamp

[Keith William Knull]

Just got a Grabo for Christmas so I came up with a few ideas to maximize its usefulness.
It’s designed as a battery powered lifting tool that monitors and maintains vacuum pressure. I wanted to make some kind of clamp that can mount to my work table to hold down work pieces quickly. This is what I came up with:

Mostly made out of 5/8” plywood.

If any of you are interested in the Grabo Lifter, check out Izzy Swan on YouTube.

[DIYer]

Thanks Keith William Knull! We've added your Vacuum Clamp Holder to our Miscellaneous category,
as well as to your builder page: Keith William Knull's Homemade Tools. Your receipt:

Vacuum Clamp Holder by Keith William Knull

tags: clamp, vacuum, holder

[Floradawg]

Just got a Grabo for Christmas so I came up with a few ideas to maximize its usefulness.
It’s designed as a battery powered lifting tool that monitors and maintains vacuum pressure. I wanted to make some kind of clamp that can mount to my work table to hold down work pieces quickly. This is what I came up with:

Mostly made out of 5/8” plywood.

If any of you are interested in the Grabo Lifter, check out Izzy Swan on YouTube.

1/4-20 in Canada? They might disown you