Captain's Lathe Reverse Tumbler

Made reverse tumbler for my CQ6128 x 660 lathe (bigger brother of G0602) last summer.
Followed ideas of the people who published their projects. Have seen numerous pictures
of reverse tumblers of so many old lathes, but I was not happy with very small gaps
between Forward / Neutral / Reverse positions which I got on my lathe.
There was no enough space to put proper detent. (picture 1)

Decided to make it with different design by using 3 gears. I don't claim that I am
the first one who did it this way, but I couldn't find any picture of reverse tumbler
with 3 gears in that order on the web. (picture 2)

Unfortunately big gear got stuck and damaged nylon 44 teeth gear. (picture 3)

Managed to complete job in third attempt, by using 3 smaller gears from scrapped
motorcycle gearboxes. And it works even with damaged 44 teeth gear (picture 4)

Needles to say that lathe plate looks like Swiss cheese after 3 attempts.
As you can see every hole is threaded to M8. And there is a nut from other side
for every bolt installed. (picture 5)

Reverse tumbler in position (picture 6)

Handle in neutral position (picture 7)

Handle in reverse position (left hand threading) (picture 8)

Handle parts (brass and stainless steel)
Observe huge spaces between positions F / N / R. (picture 9)

And finaly picture of gears which I bought in China from Taobao.com.
All these gears for less than 15 USD. 4 gears 44 teeth module 1.5 and
3 gears 66 teeth module 1.5. Already bored 44 t gears to I.D. 40 mm
and made 10 mm keyway and also reduced thickness of 66 t gear to 8 mm.
2 small 12 t gears are for another project. (picture 10 )

Will have all metal gears in my lathe soon. That will be noisy.

CQ6128 x 660 lathe - present condition (picture 11)

It is just little bit more complicated than 2 gears design, (not if you
do it once only) but works great and detent spaces are greater.
Just like on the old lathes.

Really hope that anything of mentioned above will help someone to improve
his lathe. Sorry. No drawings to share. It was done without any drawing.
That also explain couple of extra holes.

LMMasterMariner

Oh wow!
Does it spin at the same speed as foward?
One complicated design that's beyond my understanding xD

Hello Herlin,

The only function of idler gear(s) is to change the direction of rotation.
They do not affect gear ratio between input gear and output gear.

LMMasterMariner

Neat job. I use motorcycle spray chain lube on my all metal gears, it sticks really well and reduces the noise by a large amount.

Congratulations LMMasterMariner - your Lathe Reverse Tumbler is the Homemade Tool of the Week!

This is a rare tool build around here (a 2014 version from Captainleeward is here), and one that we may see copied by other builders soon.

Yet another week with not just many great entries, but a nice variety of builds too. Some picks: a GM Radio Removal Tool by nortin, an Air Compressor Water Trap by jniolon, some beautiful Planes from new member aphilipmarcou, a Small Boring Head by Metaler, a Toolpost Drilling Fixture by tonyfoale, and a highly-detailed Rotary Table Driveshaft Install by rgsparber. We also had a few nice builds from bobs409, most notably a Retractable Pen Pocket Scribe.

LMMasterMariner - you'll be receiving one of our official HomemadeTools.net T-shirts:
https://s3-us-west-1.amazonaws.com/hmt-forum/shirts.png

Please PM me a mailing address, black/white color choice, and size preference, and I'll get it mailed out shortly.

And, we've added the wrench-on-pedestal award to the awards showcase in your postbit, visible beneath your username:

https://www.homemadetools.net/forum/...eWeekIcon4.png


Congrats again and nice job! :thumbsup:

Hello Tony,

Thanks for advice. Will try that instead of grease.

LMMasterMariner

Congrats on your win. Well deserved.

Congratulation on your win. You have an excellent series of photos and accompanying explanations. I like the way you used a sheet of white paper in the photo background to provide the part dimensions - works for me :D .

Thanks Tony.

Quote:

---

Originally Posted by tonyfoale

Congrats on your win. Well deserved.

---

Thanks Paul,

Quote:

---

Originally Posted by Paul Jones

Congratulation on your win. You have an excellent series of photos and accompanying explanations. I like the way you used a sheet of white paper in the photo background to provide the part dimensions - works for me :D .

---

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks LMMasterMariner! We've added your Lathe Reverse Tumbler to our Lathes category,
as well as to your builder page: LMMasterMariner's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-lathe-reverse-tumbler"> <img src="/uploads/169157/homemade-lathe-reverse-tumbler.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-lathe-reverse-tumbler">Lathe Reverse Tumbler</a> <span> by <a href="http://www.homemadetools.net/builder/LMMasterMariner">LMMasterMariner</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/lathe'>lathe</a>, <a href='http://www.homemadetools.net/tag/modification'>modification</a>, <a href='http://www.homemadetools.net/tag/gears'>gears</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

when the gears are aligined straight and spaced correctly and running true they should be pretty quiet. my 9x20 enco was horiffic, lots of noise, lots of run out bots wobbly and up&down...runout on the gears.after getting everything squared away they are quiet. also check for burrs on the gears. I bushed the gears to get the run out issue fixed.the holes were not in the center..go figure, somethings cant be fixed and stupid is one of them. someday Ill build a reverser for mine.