Printable View
Capturing a snake with PVC and a bag.
<video controls autoplay loop>
<source src="https://diqn32j8nouaz.cloudfront.net/tooltalk_17152033377382.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>
Previously:
Catching a snake in a plastic bottle - GIF
Extracting venom from a snake - GIF
Manually clearing road of snakes - GIF
Snake cane - GIF
Snake slithering along bicycle wheel - GIF
Snake slithering along mortar joint - GIF
Welding a snake out of tubes - photo
And hopefully the cobra doesn't strike over the top of the pipe!
Or bite through the bag!
If your interested: Snake Sack - Bag for Snakes
I am a licensed snake catcher in Western Australia (yeah - THAT Australia) and I use tongs, hook, bag for most of my catching. My bag though has a frame to hold the mouth of the bag open, the bag is a dark colour (black), and has loops sewn in at the bottom corners, and a tie at the top. The frame means the bag edge is held hard against the ground and the dark colour makes the open bag look like a hole to the snake (a place of refuge from the big scary snake catching guy next to it) - the handle of the bag is about 1m long (just over 3 feet) and when I made mine, I made the handle foldable for storage.Quote:
Originally Posted by imohtep56
In use the snake will often go into the bag with little encouragement, and once "mostly in" I lift the frame up so the snake goes into the bottom of the bag (bag is about 1.2m (4') deep, and then using my hook, I catch the loop on the bottom and give the bag a flick to start it spinning to twist the top shut. I then rest the bag bottom on the ground, and hook the handle under my arm pit as I tie the top shut using the ties.
The whole thing is then lowered into a plastic rubbish bin for transport to the release location.
Release is done by ensuring the bag is suspended and twisted, the ties are then undone, and the bag is lifted by the handle so the mouth is upwards but inclined (stops light pouring in the open mouth) and the bag is left to "untwist" itself. the bag is then lowered to the ground, and the mouth pointing away from me with the bag bottom on my side of the mouth. I then use my hook to pick up one or both loops and lift the bag bottom up whilst keeping the mouth on the ground - the snake will slide out to the ground with the bag between me and the snake. - usually a tap on the tail from the hook and the snake will move away from me and into the bush at the release site.
If there is interest, I can take some photos of my snake catching gear - but I will never encourage people (especially in Australia) to attempt catching snakes without proper training.
Yes please, where I live all snakes are poisonous. I keep well out of the way of them. Packed up my tent after a weekend away many years ago to find a dead snake I had accidentally killed by rolling over and squashing it under the ground sheet. Must have been attracted by food scraps or the warmth, who knows.
will do - next weekend I'll take some photos and put together some sketches of dimensions for the whole set, with particular emphasis on the bits I made.Quote:
Originally Posted by Bony
thread created - https://www.homemadetools.net/forum/snake-catching-tools-west-australia-102196#post239342Quote:
Originally Posted by Bony
with images and some sketches