Printable View
Got not quite what I planned, but despite the shortcomings it works well. I wanted to set the drill equipment right on the engine's cranks, but it turns into the opposite side. Therefore, it was necessary to install through the bus and chain.
Attachment 28689 Attachment 28690 Attachment 28691 Attachment 28692 Attachment 28693 Attachment 28694 Attachment 28695 Attachment 28696
The way you have to hold that looks sketchy as all get out! one slip and you are wrapped up in the chain!
Not detracting from this but it seems really awkward to me and a lot of work made from bits & bobs. I recently sold one that drove straight off the bar. I didn't need it any more as no longer doing any rural fencing where it excelled. Again, Not detracting from this job but I'd be using a cordless drill but then I've already have one.
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Vyacheslav.Nevolya! We've added your Chainsaw Drill Attachment to our Drilling and Drill Presses category,
as well as to your builder page: Vyacheslav.Nevolya's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-chainsaw-drill-attachment"> <img src="/uploads/221992/homemade-chainsaw-drill-attachment.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-chainsaw-drill-attachment">Chainsaw Drill Attachment</a> <span> by <a href="http://www.homemadetools.net/builder/Vyacheslav.Nevolya">Vyacheslav.Nevolya</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/drill'>drill</a>, <a href='http://www.homemadetools.net/tag/chainsaw'>chainsaw</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
I am inclined to agree, the whole arrangement looks clumsy and did I see the saw's teeth still there? There must be another way to achieve the same end, perhaps a weedwhacker motor through a gearbox?Quote:
Originally Posted by Al8236
:headshake:
as to why would you not have ground the teeth down on the drive chainQuote:
Originally Posted by Vyacheslav.Nevolya
would not a battery drill do the same job but less expensive
Here is another way.Quote:
Originally Posted by Hans Pearson
https://youtu.be/f-Ebryi5m0g
But this one isn't very fast to remove, and you need another clutch if you want to use it as a chainsaw again.
I like that "attachment" idea is better, just cover to the chain. ( if it feels reasonable )
Idea itself is very interesting.
I like that its now removable add, not " permanent modification ".
Attachment 28706 Attachment 28707
I've heard a lot of criticism. That's the essence of the problem. I build my own house, do everything myself, builders I do not hire. In order to secure wooden beams on the ceiling, steel pins need to be put into concrete. For this purpose it is necessary to make in concrete many openings in diameter of 18 mm. Someone recommends that the best cordless drill is you serious? Holes in concrete with a 18 mm cordless drill? The cordless drill will die in a couple of minutes. The house is not yet connected to the mains, it is necessary to look for a way out of the situation. I had an old broken drill, I decided to connect it to the chainsaw, but provided that the chainsaw remains preserved. So I agree that the design is dangerous and awkward, but its purpose is to drill holes in concrete, and then throw it away and forget. Thank you all for your attention.
My intention wasn't criticize. I actually liked that your version is better than that one i posted.Quote:
Originally Posted by Vyacheslav.Nevolya
Your version can be still used as a chainsaw when needed.
Personally i think that its enough to show the idea, guards, handles are stuff that people can add to their own builds, if they find those necessary.
This made me think, could this work with the 25cc grass trimmer that i have...
