Free 186 More Best Homemade Tools eBook:  
New: 300+ fresh build posts/day from 275 forums → BuildThreads.com

User Tag List

Results 1 to 7 of 7

Thread: Chinese greenhouse warming method - GIF

Hybrid View

  1. #1
    Supporting Member
    Join Date
    May 2024
    Posts
    6,121
    Thanks
    0
    Thanked 11,160 Times in 4,765 Posts

    Chinese greenhouse warming method - GIF

    New: BuildThreads.com - 300+ build posts/day (with photos)

  2. The Following 2 Users Say Thank You to ToolTalkBot For This Useful Post:

    clydeman (Mar 20, 2025), nova_robotics (Mar 23, 2025)

  3. #2
    Supporting Member Karl_H's Avatar
    Join Date
    Sep 2013
    Posts
    1,247
    Thanks
    863
    Thanked 800 Times in 463 Posts

    Karl_H's Tools
    I would think that the snow clearing is an added benefit of the heater, but the real reason for the fire is warmth for the plants.

  4. #3
    Supporting Member
    Join Date
    Aug 2021
    Location
    Cape Town SA
    Posts
    483
    Thanks
    1,498
    Thanked 232 Times in 142 Posts

    albertq's Tools
    There must surely be a fan on the far end of the heating pipes to pull the hot air through. I assume the exhaust could thus be called a "Greenhouse Gas"

  5. The Following User Says Thank You to albertq For This Useful Post:

    IntheGroove (Mar 20, 2025)

  6. #4
    Supporting Member Floradawg's Avatar
    Join Date
    Jul 2018
    Location
    Flora, MS
    Posts
    1,479
    Thanks
    2,078
    Thanked 450 Times in 345 Posts

    Floradawg's Tools
    Just a smokestack would pull it through the pipe.
    Stupid is forever, ignorance can be fixed.

  7. The Following 3 Users Say Thank You to Floradawg For This Useful Post:

    albertq (Mar 20, 2025), clydeman (Mar 20, 2025), nova_robotics (Mar 23, 2025)

  8. #5
    Supporting Member
    Join Date
    Sep 2018
    Posts
    2,923
    Thanks
    13,831
    Thanked 1,782 Times in 1,004 Posts

    nova_robotics's Tools
    That exhaust pipe is really long. Too long. The heat transfer efficiency must be nearly perfect given the length, but that's going to be a problem. After some (probably short) distance the temperatures will be low enough that creosote will condense out and cause major problems with that pipe. It's flanged, so that's nice, but it's still going to be a high maintenance item.

    Creosote is a big problem and it's counter-intuitive, but you have to keep your temps up or it will cake out on the worst places possible. You should try to keep every point of your chimney above 250F or creosote will condense out and burn your house down.

  9. #6
    Supporting Member Floradawg's Avatar
    Join Date
    Jul 2018
    Location
    Flora, MS
    Posts
    1,479
    Thanks
    2,078
    Thanked 450 Times in 345 Posts

    Floradawg's Tools
    I know pine is one of the worst woods for creosote buildup. Are any woods not a problem in that respect?
    Stupid is forever, ignorance can be fixed.

  10. #7
    Supporting Member
    Join Date
    Sep 2018
    Posts
    2,923
    Thanks
    13,831
    Thanked 1,782 Times in 1,004 Posts

    nova_robotics's Tools
    Quote Originally Posted by Floradawg View Post
    I know pine is one of the worst woods for creosote buildup. Are any woods not a problem in that respect?
    I'm certainly no expert, but pine is not very dense and burns fast. So it heats up, then cools right back down again. That makes it difficult to keep your chimney up to temperature. Also there's a lot of resin in pine. They make rosin and turpentine out of the stuff, so there's probably a lot more volatile organics to vaporize than other woods.



    2,500+ Tool Plans

  11. The Following User Says Thank You to nova_robotics For This Useful Post:

    Floradawg (Mar 24, 2025)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •