I think this upsets my wife more than any of the others things I might do to upset her.
Printable View
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks projectswithrich! We've added your Welding Magnet Cleaning Method to our Cleaning category,
as well as to your builder page: projectswithrich's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-welding-magnet-cleaning-method"> <img src="/uploads/253533/homemade-welding-magnet-cleaning-method.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-welding-magnet-cleaning-method">Welding Magnet Cleaning Method</a> <span> by <a href="https://www.homemadetools.net/builder/projectswithrich">projectswithrich</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/air-compressor'>air compressor</a>, <a href='https://www.homemadetools.net/tag/magnet'>magnet</a>, <a href='https://www.homemadetools.net/tag/cleaner'>cleaner</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
I usually use a wire brush and aim the swarf at my bin. I have always been rather wary of compressed air. It is inclined to have unpredictable results. Magnets are so handy in the workshop, but that always comes at a price.
The worst are the thin slithers of metal that attach to clothing and work their way through and your forever suddenly being stuck (even pierced if unlucky) a sharp painful something.
This is not a great idea within a shop.
With regards to getting pieces stuck in clothing, what has made the biggest difference was starting to wear a leather apron while in the shop. And wearing long pants under them so nothing gets in my socks/shoes. It also saves my shirts from grinding sparks so they now last years. For splinters, "Uncle Bill's Sliver Grippers" are great USA made tweezers. Those along with a good 10x jeweler's loupe make short work of splinters. Belomo makes a nice one.
Tweezers are common go-to. Even cheap ones can be lapped into a very tight parallel grip with fine wet or dry paper.
Finish sides first to point desired with tips lightly closed to prepare a clean corner (think of vise jaws).
Close jaws on on the paper (1 thickness) and draw out slowly and 'flat'. Do other side in same manner.
There won't be anything too small to grip.
But digging splinters is tedious; I nip them and shallow surrounding skin out with a nail clipper if below surface. Those that protrude slightly, extract with a sharp knife in a light shaving motion. Burrs have burrs and the edge catches them.