Hi Karoly,

sorry for the delay getting back to you, we had a little water get into the house during a flash flood. i have been trying to get my office back up and running so i can get back on the web and do some real work.

I hate it on forums when people just ignore others and don't offer assistance just criticism - for that reason i'm not 100% a forum fan. The programming sites tend to have a large number of individuals who are more interested in posing than being of any assistance. Begs the question why use a forum when they just want to show off.

hence to apology and yes i am going to help if you still need it.


How far have you managed to get.
I know the arduino ide keeps getting updated which causes many older class files to become outdated, sometimes you need to use an older arduino development environment to get the sketch files/hex uploaded properly.
when i get the chance i will load the code onto an atmega 2560 and see how far i get and will knock up an instruction sheet to explain what i did. i have a ramps board in the workshop i was going to use on my 3d printer so i can see if it all works as expected on completion.

I hope you are still getting stuck in with the good part of building the darn thing, at the end of the day retrofitting electronics is the easy bit.
best of look in your endeavours, i will get back to you as soon as.