Printable View
Compact magnetic drill press.
<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/magnetic_drill_oc23.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...743#post148070
https://www.homemadetools.net/forum/...804#post210022
https://www.homemadetools.net/forum/...103#post227145
https://www.homemadetools.net/forum/...982#post226743
https://www.homemadetools.net/forum/...596#post209277
I would feel a lot better if the safety lanyard was visible. I've seen a magdrill drop from overhead when the RCD (GFCI) was tripped by someone else in the same circuit.
I was thinking the same thing. Those drills are great, until one falls off for one reason or another. I have to admit it, but I hit the wrong switch ONE time. Turned OFF the magnet instead of turning on the drill!!!!! Was a good thing I had the safety cable hooked up.
I think maybe the mag drill is about the only power tool the battery powered junkies haven't made yet.
Sorry to break it to you but Milwauke does mag drills as battery operated - and I will admit they work fairly well. (our local rental mob has them)Quote:
Originally Posted by Frank S
interesting While I have little respect for battery tools in general the stupid batteries always seem to die sitting on the shelf, probably because I don't use mine often enough. The other thing about them is it seems you have to stay with 1 brand or another because of non-interchangeability for the most part. There are times when a battery tool happens to be the only logical choiceQuote:
Originally Posted by desbromilow
Edit I just searched for cordless mag drills and found Dewalt has them as well 20v flexvolt Pricy though $2300.00 Milwaukie $2629.00
little hard for me to justify one LOL.
Quote:
Originally Posted by Frank S
Frank,
I agree - Hoiki also make them, and I can't afford any of them. (My Magdrill is a $300 corded unit from Vevor)
Regarding battery tools, I am in a similar camp to you with respect to the annoyance of brand (and model) monopolies, and the concern of battery degradation. The tools have a place, and I do have a very small selection (1 drill, 1 driver) which have paid for themselves many times over when doing construction... but I am equally annoyed that the manfacturer (Stanley) decided to move from 18V Li to 18V plus - necessitating a change of perfectly usable tools since they will not supply batteries for the old system, and the new system is not compatible. I have seen countless serviceable tools dumped because obtaining replacement batteries is impossible, or uneconomical. I have started repacking my own batteries in cordless appliances (some success), and will be doing that when my Stanley batteries finally die.
For some of the tool brand battery up grades they make adapters. I've taken my Dewalt 18v tools to 20v and now have clipped a bit of excess plastic off of the adapter so the 20v flex volt batteries will fit. but I have an older Dewalt 24v commercial Sawzall that nothing will fitQuote:
Originally Posted by desbromilow