Connecting a wind turbine - GIF

[ToolTalkBot]

Connecting a wind turbine.




Previously:

Bladeless wind turbine - GIF
CNC machining a turbine blade - GIF
Crane drops wind turbine rotor - GIF
Wind turbine blade counterweight - GIF
Wind turbine blade transporting clamp - photo
Wind turbine explosion - GIF
Wind turbine installation time-lapse - GIF
Wind turbine nacelle transport - photo
Wind turbine that folds down for maintenance access - GIF

[Philip Davies]

Lemme out!

[gatz]

Don't bugger those threads, Jim!

[Frank S]

Why not have 3 or 4 pilot guide pins that stick out longer than the bolts?

[bob_3000]

Why not have 3 or 4 pilot guide pins that stick out longer than the bolts?

I'd imagine there's stuff going on inside the cone that's doing the alignment.

[Frank S]

I'd imagine there's stuff going on inside the cone that's doing the alignment.

There would have to be something. Trying to line up the 56 studs on large earth moving wheels is nightmare enough.

But it doesn't look like there are any guiding pins or keys in the video. If you notice them having to rotate the hub back and forth to get the bolts to go in

[Saltfever]

. . . or turn a slightly smaller shoulder diameter (not the threads), with or without a conical tip, on the ends of the bolts?

[Duke_of_URL]

After installation of all those fasteners one of the unseen crew says, "Hey guys, we forgot to first install these special locking washers before assembly!"