Container Lid Cracking Spanner

[Toolmaker51]

Good write up. Informative and to the point. Beats a utube any day

Same thought occurred to me....often a neo-videographer with more recording equipment than tooling steals 40 minutes of our time for what should be
"cut it off, drilled and bored, slotted it freehand, welded on handle".
I save a LOT of links; bet not 10% are video.

Here's a little trick to help hand stamping; stretch a couple lengths [for thickness] of masking tape as if to 'underline' your text. You'll feel the lower edge of letter reach that point. At each mark, put a small dot aligned with middle of stamp body, that aids spacing between successive figures.