Continuous plastic swarf - GIF

[Altair]

Continuous plastic swarf.



Previously:

Blowing swarf out of machined holes - GIF
Glowing hot hard turning - GIF
Cleaning shop floor with magnets - GIF

[Frank S]

It takes a little practice to get the depth of cut the Speed and feed just right, but it sure saves a lot of clean up.

[desbromilow]

pulley lagging?

[hemmjo]

If they are going to turn that whole pipe... They are going to need a bigger box!!!

[Frank S]

If they are going to turn that whole pipe... They are going to need a bigger box!!!

When they get through, they will stretch out the swarth string and measure it in an attempt to break someone else's record.