Corrugated roofing shear - GIF

[Altair]

Corrugated roofing shear.




Previously:

Shearing a long metal sheet - GIF
Rotary shear - video
Industrial shear - GIF
Metal cutting shears - video
Throatless shear - GIF

[mwmkravchenko]

Sure beats a skill saw that I used to use!

[Frank S]

Sure beats a skill saw that I used to use!

Standing there watching the 18-year-old apprentice do the work is how I would prefer it done, but I usually score a line with a box knife clamp 2 pair of vice grips 1 to either side of the line step on one pair and pull up rapidly with the other pair, the sheets will usually tear along the line. it works quite well with corrugated sheet metal from Home gone to pot or Highes not so much for real commercial R panels

[mwmkravchenko]

Standing there watching the 18-year-old apprentice do the work is how I would prefer it done, but I usually score a line with a box knife clamp 2 pair of vice grips 1 to either side of the line step on one pair and pull up rapidly with the other pair, the sheets will usually tear along the line. it works quite well with corrugated sheet metal from Home gone to pot or Highes not so much for real commercial R panels

The key is getting it done. The score and tear works. But I don't like the finish left behind as much. Like you said, Depends on the gage of the material you have at hand. I've used shears, aviation snips. Knife like you, although I just bent it up and down until there's metal fatigue and you have a cut.

Home Despot is up here in Canada to, Lowes as well. Been through Texas in the early 80's when there was record cold that winter. But don't remember Highes. I'll look it up.

[Frank S]

The key is getting it done. The score and tear works. But I don't like the finish left behind as much. Like you said, Depends on the gage of the material you have at hand. I've used shears, aviation snips. Knife like you, although I just bent it up and down until there's metal fatigue and you have a cut.

Home Despot is up here in Canada to, Lowes as well. Been through Texas in the early 80's when there was record cold that winter. But don't remember Highes. I'll look it up.

Highs is my name for lowes, the nearest 84 lumber is nowhere to be found anymore, there are no Minnards, the only other places are a Higgenbotham's and rarely any bargains to be found there it Seams that Pate's hardware& lumber are direct competition for ACE and TrueValue 'novalue' that leaves only Builder's Supply. but that is a 230 mile drive 1 way I have mesquite trees that are 40 feet tall or more with 12" trunks but they don't grow straight enough to make lumber out of so I haven't bothered building a saw mill for that reason. I'm content in burning 2 to 3 cords every winter from just the dead ones.

[mwmkravchenko]

Highs is my name for lowes, the nearest 84 lumber is nowhere to be found anymore, there are no Minnards, the only other places are a Higgenbotham's and rarely any bargains to be found there it Seams that Pate's hardware& lumber are direct competition for ACE and TrueValue 'novalue' that leaves only Builder's Supply. but that is a 230 mile drive 1 way I have mesquite trees that are 40 feet tall or more with 12" trunks but they don't grow straight enough to make lumber out of so I haven't bothered building a saw mill for that reason. I'm content in burning 2 to 3 cords every winter from just the dead ones.

OK makes sense. I grew up in a similar area in Manitoba. There's only one large city in the whole province. And we were 72 miles from the outskirts.

I have 7 acres here. Fully wooded. Some poplar, cedar, a few Oak, many Ash that are dying from the emerald ash borer, and Sugar Maples. I am contemplating making a mill. So many ash are sitting and almost dead. I worked on a mill as a young man. ANd periodically on my current property with a contract sawyer.

Kind of special to make your own lumber and use it. But as you say it has to be worth doing it.